Gregory Bender

View all O-rings for the Suzuki DR350 for sale

O-ring kit to fit the Suzuki DR350

Part number: OR-KIT

Price: $10.75 In stock

Shipping costs

O-ring kit to fit the Suzuki DR350
O-ring kit to fit the Suzuki DR350

Photo courtesy of Gregory Bender.

O-ring kit to fit the Suzuki DR350

Photo courtesy of Gregory Bender.

Direct link to image

O-ring kit to fit the Suzuki DR350

Quick reference code: OR-KIT

Quick reference code: OR-KIT-VITON

Most carburetor O-rings are available in Buna-N material or Viton material. Viton is more resistant to deterioration when in contact with modern fuels.

O-ring kit contains the following eighteen (18) O-rings:

  • OR-1: Two (2) O-rings to seal the oil lines to the engine case (SPN# 09280-12008)
  • OR-2: One (1) O-ring to seal the dip stick to the frame (SPN# 09280-17003)
  • OR-3: One (1) O-ring to seal the oil strainer to the frame near where the frame oil is drained (SPN# 09280-22008)
  • OR-4: One (1) O-ring to seal the oil filter to the engine case (SPN# 09280-16005 or SPN# 09280-15007)
  • OR-5: One (1) O-ring to seal the oil filter cover to the engine case (SPN# 09280-72001)
  • OR-6: One (1) O-ring to seal the carburetor intake manifold to the cylinder head (SPN# 09280-40010)
  • OR-7: Two (2) O-rings to seal the valve inspection covers to the cylinder head (SPN# 11177-14D00 or SPN# 11177-14D01)
  • OR-8: One (1) O-ring to seal the large plug to the magneto cover (SPN# 09280-33004)
  • OR-9: One (1) O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Available in Buna-N or Viton material. Viton is more resistant to deterioration when in contact with modern fuels.
  • OR-10: One (1) O-ring to seal the float valve seat to the carburetor body (SPN# 13374-35C00). Available in Buna-N or Viton material. Viton is more resistant to deterioration when in contact with modern fuels.
  • OR-11: One (1) O-ring to seal the neutral switch or neutral switch cover to the engine case (SPN# 09280-26005)
  • OR-12: One (1) O-ring to seal the seal head assembly to the rear shock body
  • OR-13: One (1) O-ring to seal the float cage assembly to the carburetor body on BST carburetors (constant velocity or CV); also seals the choke/enricher plunger assembly to the carburetor body on TM carburetors (pumper) (SPN# 13374-46710). Available in Viton material only. Viton is more resistant to deterioration when in contact with modern fuels.
  • OR-14: One (1) O-ring to seal the timing chain tensioner bolt to the timing chain tensioner assembly (SPN# 12832-02A00)
  • OR-15: One (1) O-ring to seal the starter motor to the left engine case (SPN# 09280-24003)
  • OR-16: One (1) O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV). Available in Buna-N or Viton material. Viton is more resistant to deterioration when in contact with modern fuels.