http://www.thisoldtractor.com/gtbender/
Updated: 2006 Jan 12
This information was gleaned from eurocarb. I meticulously recreated the table of values from a difficult to read original. Therefore, mistakes may be present. Here is a link to the original image in case you would like to scrutinize any particulars.
Table:
| Type | Value X | Characteristic expressed in millimeters | |||||
|---|---|---|---|---|---|---|---|
| ØA | ØB | C | D | ØF | G | ||
| M1 | 1 | 2 | 1.1 | 19.5 | 19.9 | ||
| M2 | 2 | 2.02 | 1.1 | 26 | 13.4 | 1.97 | 20 |
| M3 | 3 | 2.02 | 1.1 | 20.5 | 18.9 | ||
| M4 | 4 | 2.02 | 1.1 | 21.5 | 17.9 | ||
| M5 | 5 | 2 | 0.6 | 19.5 | 10.9 | ||
| M6 | 6 | 2.02 | 1.1 | 22.5 | 16.9 | ||
| M7 | 7 | 2.02 | 0.6 | 23 | 16.4 | 1.97 | 21 |