http://www.thisoldtractor.com/gtbender/
Updated: 2010 Dec 25
If you are just running stock electrics, you will find the 300 watt loop frame generator to be more than adequate. However, if you start adding lights, heated clothing, etc., you will find that the power supply is not limitless. Loop frame alternator conversions have been around for a long time in various formats. Here are a few examples.
Greg Field and Bob Nolan put a loop frame alternator conversion kit together and have made it available. I have purchased and installed the kit. It is top notch in every respect and very well done. I am very pleased with how it fits and the power output is fantastic, even at idle. I have nothing but good things to say about this kit. If you are interested in purchasing it, please contact Greg Field directly at greguzzi>at>comcast.net. Here are some words from Greg Field describing the conversion:
Bob Nolan and I are selling a complete kit to replace the 300w generator on your V700, Ambassador, V7 Special, or Eldorado with a 600w Nippon Denso alternator.
The kit includes a new ND 600-watt alternator, a mounting bracket that replaces the generator bracket, and all wiring necessary to make it integrate with the stock wiring. It all bolts right on and requires no changes of any kind to stock parts, not even the generator-belt cover or stock wiring connectors.
The alternator is brand new and covered by an ND warranty. It has an internal regulator. Two wires are necessary to run it: one to the battery and another that connects to switched power. A third wire is optional and goes to the charging light on your dash.
The bracket is welded of 1⁄4 in steel. It mounts to the two stock mounting bolts to the engine block. We also added a strap that bolts to the front bolt of the distributor. It will be painted. Bob and I will warranty the bracket as follows: If it cracks or breaks within a year, we'll fix or replace it.
The wiring harness consists of two wires and an adaptor connector. One wire carries the generated electricity to the battery. Another short wire connects to switched power at the coil. The adaptor connector allows attachment of the stock wiring for the generator light on your dash.

Photo courtesy of Greg Field.

Photo courtesy of Greg Field.

Photo courtesy of Greg Field.
Installation is simple and straightforward. The included instructions are great. Do take the time to install studs to secure the bracket to the block (rather than Guzzi's original bolts).
On my maiden voyage I had trouble with the connector to the idiot light coming loose. The first time I thought perhaps I had failed to connect it. The second time I knew something was up and I gave the female spade connector a little squeeze with my pliers from the toolkit. It still wiggled loose. I solved the problem by replacing the adapter with a simple female spade connector - no more disconnects for 1,000 + miles.
| Download Name and Link | File Size | Number of Pages in File |
|---|---|---|
| 2,073 KB | 6 pages |
To view PDF files, you will need to download and install the free Adobe Acrobat Reader.
NOTE: If you have trouble viewing PDF files inside your browser, try saving them to your computer (right-click the link, then choose the save option). Then, open each file directly in Adobe Acrobat Reader.
I took these pictures of the alternator conversion Maynard (Neil Hemenway) did on his Eldorado at the Moto Guzzi National Owners Club (MGNOC) 2004 National Rally. I hope they prove useful to those interested in such a transformation.

Photo courtesy of Gregory Bender.

Photo courtesy of Gregory Bender.

Photo courtesy of Gregory Bender.

Photo courtesy of Gregory Bender.
Thanks to Kevin Hahn of Scrambler Cycle for posting this information on the Yahoo! Loopframe_Guzzi news group.

Photo courtesy of Kevin Hahn.

Photo courtesy of Kevin Hahn.

Photo courtesy of Kevin Hahn.

Photo courtesy of Kevin Hahn.

Photo courtesy of Kevin Hahn.

Photo courtesy of Kevin Hahn.
Thanks to Paul Linn, Kevin Hahn of Scrambler Cycle, and Charlie Mullendore of Antietam Classic Cycle for posting this information on the Yahoo! Loopframe_Guzzi news group and sending me some of this information in private emails.
If you want to build your own bracket and are wondering which alternator to use, the Nippon Denso 100211-1670 or Nippon Denso 100211-4520 is a great choice. Here are some cross-references:

Photo courtesy of www.jegs.com.








