Greg Bender
http://www.thisoldtractor.com/gtbender
| Description | NSK | SKF | Torr/FAF | Seal Master | |
|---|---|---|---|---|---|
| Insert | Bearing, tapered bore w/adaptor, relube | UK | -- | -- | -- |
| Bearing, set screw, wide ir, relube | UC | YAR2 | GCxxxxKRRB | 2-xx | |
| Bearing, set screw, narrow ir, non-relube | UB | -- | -- | V | |
| Bearing, ecc locking collar, narrow ir, non-relube | EN | YET2 | GRAxxxxRRB | VxxE | |
| Bearing, ecc locking collar, wide ir, relube | EW | YEL2 | GxxxxKRRB | R-xxE | |
| Prefix | Block, tapped-base with set screw | UCPA | -- | -- | TB |
| Block, with set screw | UCP | SYxxTM | RASC | NP | |
| Block, eccentric locking collar, narrow ir | ENP | SYxxFM | VAS | VPxxE | |
| Block, eccentric locking collar | EWP | -- | RAS | RPxxE | |
| Block, low base with set screw | UCPLL | -- | YAK | NPL | |
| Block, low base w/ecc locking collar, narrow ir | ENLPL | SYHxxFM | VAK | VPLxxE | |
| Block, low base w/ecc locking collar | EWPLL | SYHxxWM | RAK | RPL | |
| Flange, square, with set screw | UCF | FYxxTM | RCJC | SF | |
| Flange, square, with set screw | UCFX | FYMxxTM | -- | MSF | |
| Flange, square, w/ecc locking collar, narrow ir | ENF | FYxxFM | VCJ | VFxxE | |
| Flange, square, w/ecc locking collar | EWFH | FYxxWM | RCJ | RFxxE | |
| Flange, oval, with set screw | UCFL | FYTxxTM | RCJTC | SFT | |
| Flange, oval, w/ecc locking collar, narrow ir | ENFL | FYTxxFM | VCJT | VFTxxE | |
| Flange, oval, w/ecc locking collar | EWFLH | FYTxxWM | RCJT | -- | |
| Flange, oval, w/ecc locking collar | EWFL | -- | -- | RFTxxE | |
| Flange, pressed steel, oval w/set screw | UBPFL | -- | -- | SSFT | |
| Flange, pressed steel, oval w/ecc locking collar | ENPFL | FTPxxFM | RAT | SSFTxxE | |
| Flange, round, cartridge w/set screw | UCFC | -- | -- | SFC | |
| Flange, round, cartridge w/ecc locking collar | EWFC | -- | -- | SFCxxE | |
| Flange, offset, 3 bolt w/set screw | UCFK | -- | -- | RB | |
| Take-up type | T | TB | RTU | RT | |
| P/N | Pressed steel cover | Z | *Y | -- | AVAIL |
| Cast iron cover | C | -- | -- | -- | |
| Standard series, metric | 2XX | XX | XX | S-2xx | |
| Medium series, metric | 3XX | -- | -- | -- | |
| Medium series, metric | Xxx | Mxx | -- | 53xx | |
| Standard series, inch (see shaft size chart) | 2xx-xxS | x-x/x | x-x/x | -xx | |
| Medium series, inch (see shaft size chart) | 3xx-xxS | x-x/x | x-x/x | -xx | |
| Suffix | Spherical housing bore tolerance class J7 | J | |||
| Inch size set screw in locking device | U | ||||
| Improved set screw design | W |
*Prefix