gregory bender

http://www.thisoldtractor.com/gtbender

Brake lever length (on rear brake plate)

There are two different splined brake levers that are secured directly to the rear brake plate.

• One style is open on the non-splined end and measures approximately 70 mm from the center of the splines to the center of the pin. This is the most common lever.
• Another style is closed on both ends and measures approximately 100 mm from the center of the splines to the center of the pin. This is less common and was fitted to many police models. Thanks to Cam Conklin for posting the length of his lever on the Yahoo! Loopframe_Guzzi news group.

• Return to previous page