greg bender
http://www.thisoldtractor.com/gtbender
Fork lock removal
- Use a small screwdriver to pry the chrome cover pin out. Try to pry behind the cover so as not to damage the front.
- If you have the key, you can just insert the key, turn it, and withdraw the lock.
- If you do not have the key, you have a choice to make...
- Drill it out and replace it with a new one. If you choose this method, be sure you remove the steering head bearings beforehand.
- Take it to a locksmith, have them pick it and withdraw it and then have them make a key for it.
Unless you know an inexpensive locksmith, drilling and replacing the lock is probably the most cost effective route to go.