Greg Bender
http://www.thisoldtractor.com/gtbender
The stop tab that is welded to the left side of the frame is easily broken off. Unbeknownst to me, mine was already broken off when I took the frame to be powder coated. Only later did I discover my mistake (ah, the things one learns with experience).
I made a replacement tab using an existing stop tab as a pattern. I've included a drawing below for those of you who may need it.
Note on printing this PDF file: When printing this PDF file, be absolutely sure that "Page scaling" is set to "None". If you don't do this, your print will not be of the proper size.
| Center stand stop tab | 17 KB | 1 page |
To view PDF files, you will need to download and install the free Adobe Acrobat Reader version 5.0 or higher.
NOTE: If you have trouble viewing PDF files inside your browser, try saving them to your computer (right-click the link, then choose the save option). Then, open each file directly in Adobe Acrobat Reader.