gregory bender

http://www.thisoldtractor.com/gtbender

Rear drive bearing cross-references

Updated: Prior to Dec 11, 2007

There are three different types of bearings that are used in the rear drive. All are open (not shielded or sealed).

• One (1) large ball bearing (ID: 70 mm, OD: 110 mm, Width: 13 mm)
  This is the same bearing that has been used in all Moto Guzzi big twin rear drives from the V7 / V700 in 1968 through to this day, with the possible exception of some of the newer sport rear drives.
  • Moto Guzzi MG# 92201070
  • Maryland Metric item no. 16014
  • SKF 16014
  • FAG 16014
  • RIV ELn 70
  • STEYR 16014
• One (1) needle bearing (ID: 40 mm, OD: 55 mm, Width: 17 mm)
  This is the same bearing that has been used in all Moto Guzzi big twin rear drives from the V7 / V700 in 1968 through to this day, with the possible exception of some of the newer sport rear drives.
  • Moto Guzzi MG# 92254340
  • FAG NAO 40 x 55 x 17
  • FAG (Old No.) NAF 40 x 55 x 17
  • INA NAO 40 x 55 x 17
  • SKF (Old No.) NAF 40 x 55 x 17
  • SKF (Eur.) NAO 40 x 55 x 17
• Two (2) tapered roller bearings (ID: 25 mm, OD: 52 mm, Width: 16.25 mm)
  This is the same bearing that has been used in all REAR DRUM BRAKE Moto Guzzi big twin rear drives from the V7 / V700 in 1968 through to the 850T and V7 Sport.
  • Moto Guzzi MG# 92249225
  • Maryland Metric item no. 30205
  • FAG 30205A
  • RIV 01/02/7205
  • SKF 30205A
  • SNR 30205
  • STEYR 30205

• Return to previous page