greg bender
http://www.thisoldtractor.com/gtbender
Allows removal of the rivets which hold the plate onto the steering head. Instructions:
- Place the tool inside the steering head.
- It's helpful to shine a light up the steering head while you look down.
- "Feel" around using the point to find the hole where the rivet is.
- Use a 7/16" wrench to turn the nut and advance the point to push the rivet out.
- You may want to put some tape over the outside of the rivet so it doesn't drop and get lost.
Stephen Brenton is kind enough to manufacture this tool. Contact him directly for price and availability.