Greg Bender

http://www.thisoldtractor.com/gtbender

Rear drive seal sizes

Large inner seal

The physical dimensions of this single lip seal (MG# 90407085) are as follows:

• ID: 70 mm
• OD: 85 mm
• Width: 8 mm

Small outer seal

The physical dimensions of this single lip seal (MG# 90403850) are as follows (Viton seals with serrated lips are recommended):

• ID: 38 mm
• OD: 50 mm
• Width: 7 mm

The physical dimensions of the seals for the rear drive are as follows:

• Large inner seal (MG# 90407085): 70 mm ID x 85 mm OD x 8 mm thick
• Small outer seal (MG# 90403850): 38 mm ID x 50 mm OD x 7 mm thick

• Return to previous page