http://www.thisoldtractor.com/gtbender/
Updated: 2009 Apr 19
For some time now I've been putting up with “pulsing brakes” . I've known the problem was warped rotors, but just hadn't done anything about it. So, with 114,000 miles on the odometer, I figured it was time for new discs front and rear (rear rotors were original, front rotors had been replaced at 30,000). Replacement is straight forward, so I won't even bother going over it. The end result is no more pulsing and brakes that are every bit as good as before (read: no discernible improvement in braking performance). Here are the parts I chose:
Brembo makes good stuff and I like them. Very competitive prices on these parts too.
I went with my wallet on the pads. I knew I didn't want to go with ceramic (due to the increased wear on the rotors), so I stuck with the standard semi-metallic pads.