Gregory Bender

Wiring sub-harness: (civilian turn signals) turn signals: MG# 12748600

Created:

Updated:

// //

Buy a new duplicate of this original wiring harness

This sub-harness connects the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals. This sub-harness is only used on models equipped with turn signals.

Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals (two mostly complete harnesses are shown in this photo).
Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals (two mostly complete harnesses are shown in this photo).

Photo courtesy of Gregory Bender.

Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals.
Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals.

Photo courtesy of Gregory Bender.

Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals.
Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals.

Photo courtesy of Gregory Bender.

Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals.
Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals.

Photo courtesy of Gregory Bender.

Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals.
Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals.

Photo courtesy of Gregory Bender.

Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals.
Sub-harness connecting the fuse block and distribution panel to the right handlebar switch sub-harness (turn signals) and the subsequent wiring to the individual turn signals.

Photo courtesy of Gregory Bender.

Note: This sub-harness does not include the wires that connect the 3 connection female spade connector to the front turn signals. Originally, the front turn signals had sufficiently long wires to directly connect to the 3 connection female spade connector. Hence, no need for those wires in this sub-harness.