Subject: Re: Exhaust Nut on Eldo
Author: Martin Cooke
Date: Jul 30, 2000, 11:17 PM
Post ID: 1701651642
You can use a C spanner from any decent tool company. Mines an adjustable
"Britool" spanner, works fine.
Can you get aftermarket Exhaust clamps in USA? If so I recommend the sort
that have a lockring that tightens against the cylinder head. Never seen one
of them come loose.
cookie
----- Original Message -----
From: Tim <tf-@gte.net>
To: Loopframe <Loopfram-@topica.com>
Sent: Monday, July 31, 2000 5:51 AM
Subject: Exhaust Nut on Eldo
| Any ideas on a good tool to use to remove the nuts on the Eldo exhaust header pipes? I know you can get one from many Guzzi sources, but |
| if there would be something I may already have that could be used successfully. I have heard that the original tool needed to be used with caution, as it would slip. Also, is the safety wire idea good enough, or is there something else that should be done to prevent the backing out? Thanks, Tim 1973 Eldo ___________________________________________________________ T O P I C A The Email You Want.http://www.topica.com/t/16 Newsletters, Tips and Discussions on Your Favorite Topics |