Subject: RE: Disk front ends
Author: murp-@aol.com
Date: Jan 30, 2001, 6:50 PM
Post ID: 1705193492
Cheesehead and Mark,
Thanks for the info, which is much appreciated.The only remaining
question is about the left side axle spacer, for which no part # was
given. Is this the same as part # 13615641, the right side spacer, or
will I have to get a special made as mentioned by David? Also, can
either of you guys supply the bearing carrier, part # 13613641?
Thanks,
Brian
MG Cycle wrote:
| FWIW, Bearing Carrier/Disk flange, whatever you want to call them, axle and spacer #s. Disk Eldo: 1- 14620301 L 1- 13613641 R Axle 13614140 Axle spacer R 13615641 T: 1- 14620301 L 1- 14620302 R Axle 14614102 Axle spacer R 14616301 T3/Vert/etc. 2- 14620302 Axle 14614102 Axle spacer R 14616301 V7 Sport/750S 2- 14620301 Axle 14614102 Axle spacer R 14616320 Rim shown as different part number between an Eldo and a T and doesn't cross-reference, but using the same hub. Don't know what the difference would be at that rate, would think any T/T3 etc. wheel should work fine. Same rotors. My understanding is that to do a dual disk Eldo requires 2 of the 13613641. It is the oddball of oddballs, NLA from Guzzi supposedly. Normal switch to a left side caliper on a T nessecitates changing the carriers from one side to the other, that might be a PITA due to the different axle used on the Eldo. Can't say for sure, haven't done it, maybe Mark can clarify. CHEESEHEAD |