Topica Loopframe_Guzzi Archive


Subject: Re: Ambo carb problems

Author: Steve Bruns

Date: Apr 7, 2001, 5:38 AM

Post ID: 1706217199


Jeff:

Make sure that the proper throttle cable is installed in the carbs.
Using the short choke cables will not allow the slides to close all the
way and will create the symptoms you describe. There is a reason that I
know this. Float height is measured from the bottom of the float to the
upper mating surface on the carb body with the float chamber removed
and holding the float (and needle) closed. Should be around 24mm.
Clear as mud, eh?

Steve Bruns

Entire thread: