Topica Loopframe_Guzzi Archive


Subject: RE: Generator rebuild advice

Author: Scheer, Peter L

Date: Jun 19, 2001, 12:49 PM

Post ID: 1707178237


Thanks Kev and Rich


 -----Original Message-----
From: Kevin Graf [SMTP:kgr-@midwestpension.com]
Sent: Tuesday, June 19, 2001 3:36 PM
To: Loopfram-@topica.com
Subject: RE: Generator rebuild advice

============================================================
How do you want to save today?
29 ways to save big bucks on stuff you want - FREE.
http://click.topica.com/caaacgDb1dfltb2DJrHa/TopOffers
============================================================

Pete,
The only thing I do preiodically is make sure it's still charging, by
putting a voltmeter on the battery, bringing the engine up to 2000 rpm -
3500rpm. As long as it's putting out high 13's( over 14V even better) I
don't worry about it.
When my generator bracket cracked, it burnt out the bearing in there, that
was replaced. Haven't had any problems so far.

-----Original Message-----
From: Scheer, Peter L [mailto:plsc-@tycoelectronics.com]
Sent: Tuesday, June 19, 2001 2:55 PM
To: 'Loopfram-@topica.com'
Subject: Generator rebuild advice


============================================================
The best bargains are just a click away.
Choose TopOffers for cool savings, hot deals, & free stuff.
http://click.topica.com/caaacgLb1dfltb2D1Vxa/TopOffers
============================================================

Guys
any input is welcome here.
Because of very slow cranking speed, I opened up the starter and cleaned
up
the armature and sprayed it down with the contact cleaner as recommend on
the list. Starter works much better now.

So now I am wondering, the generator is very much like the starter with
armature and winding etc. If the starter needed to be freshened up,
maybe the generator does too?

Any experience, with maintenance frequency on these? are they pretty
trouble free or what?

I'll probably tear into it during the winter anyway, just want to see if
I
should do it sooner.
Want to minimize down time especially since the weather has become balmy
in
central PA
Thanks
Pete
71 Ambo

Entire thread: