Topica Loopframe_Guzzi Archive


Subject: RE: Generator rebuild advice

Author: Kevin Graf

Date: Jun 19, 2001, 1:00 PM

Post ID: 1707178463


Everyone can thank Kieth when their generators go on the blink!

-----Original Message-----
From: Keith Ruff [mailto:klru-@webspan.net]
Sent: Tuesday, June 19, 2001 3:44 PM
To: Loopfram-@topica.com
Subject: RE: Generator rebuild advice


============================================================
TopOffers. The Smart Shoppers Savings Secret!
Cool savings. Hot deals. Free Stuff.
All right in your in-box.
http://click.topica.com/caaacgKb1dfltb2D1Vxa/TopOffers
============================================================

isn't there a return spring on the generator????


Kevin Graf wrote:
 Pete,
The only thing I do preiodically is make sure it's still charging, by
putting a voltmeter on the battery, bringing the engine up to 2000 rpm -
3500rpm. As long as it's putting out high 13's( over 14V even better) I
don't worry about it.
When my generator bracket cracked, it burnt out the bearing in there,
that
was replaced. Haven't had any problems so far.

-----Original Message-----
From: Scheer, Peter L [mailto:plsc-@tycoelectronics.com]
Sent: Tuesday, June 19, 2001 2:55 PM
To: 'Loopfram-@topica.com'
Subject: Generator rebuild advice


============================================================
The best bargains are just a click away.
Choose TopOffers for cool savings, hot deals, & free stuff.
http://click.topica.com/caaacgLb1dfltb2D1Vxa/TopOffers
============================================================

Guys
any input is welcome here.
Because of very slow cranking speed, I opened up the starter and
cleaned up
the armature and sprayed it down with the contact cleaner as recommend
on
the list. Starter works much better now.

So now I am wondering, the generator is very much like the starter with
armature and winding etc. If the starter needed to be freshened up,
maybe the generator does too?

Any experience, with maintenance frequency on these? are they pretty
trouble free or what?

I'll probably tear into it during the winter anyway, just want to see
if I
should do it sooner.
Want to minimize down time especially since the weather has become balmy
in
central PA
Thanks
Pete
71 Ambo



Keith Ruff
71 Police Amabassador - NJ

Entire thread: