Topica Loopframe_Guzzi Archive


Subject: RE: slow cranking

Author: Pete Scheer

Date: Jul 17, 2001, 5:37 AM

Post ID: 1707521231


Bob
I had there same symptoms and it turned out to be high resistance in the
starter.
Before I pulled the starter and cleaned up the armature surface ( where the
brushes contact)
The machine would crank slowly when cold and then just bog down when hot.
It was Russian roulette style starting.
Now it cranks much faster cold or hot.
This is all with a lawn tractor battery (sealed ) 365 amps.

I know you said in a previous mail that the starter is good. But boy it
sounds just like my experience.

Pete

-----Original Message-----
From: Robert Hawkes [mailto:haw-@frontiernet.net]
Sent: Monday, July 16, 2001 6:47 PM
To: Loopfram-@topica.com
Subject: Re: v-700 heads


============================================================
Millions and millions of gently used, out-of-print and
rare books and current best sellers! Visit 21 North Main
and discover a whole new level of service.
http://click.topica.com/caaacDCb1dfltb2DJrHa/21NorthMain
============================================================

Ian,
Thanks, you are probably right I am starting to perhaps get too finicky.
Anyway, yesterday the missus and I went on a 3 hour, 100 mile cruise! It
handled well with the extra poundage and it didn't skip a beat. It hauled
hard on hills but then it is only a 750. It still seems to be running a bit
hot and perhaps just another, now friendly, visit to Sport Cycle for more
tuning is in order. I do learn from them also. Also, at one point in the
trip, about 50 miles out we stopped and then started up again. The bike
started fine, even though I was prepared to pop the clutch (useful to have
the missus around to help with this!). When we returned home I tried to
start the bike just as a test and it didn't budge. Any ideas? Are the
pistons still too new and thus too tight to give when she's hot? I have a
battery in the bike that's rated for 230 cc amps and 290 cranking amps. I am
thinking that just getting something new (maybe a Sears garden tractor
battery rated at 400cc amps) would be the way to go. Best, Bob
----- Original Message -----
From: Ian Adkins <adk-@gte.net>
To: <Loopfram-@topica.com>
Sent: Sunday, July 15, 2001 10:50 PM
Subject: Re: v-700 heads


 ============================================================
FREE CELL PHONE HEADSET. New York is the first to ban drivers
from using cell phones without headsets. Forty states are
following the ban! Get a FREE Cell Phone Headset. Click Here
http://click.topica.com/caaacEJb1dfltb1FlG8a/BTEdirect
============================================================

Bob,

I doubt this would be your problem since only one of your cylinders was
giving you problems.

And to reiterate....my bike has been running well without them.

Regards...Ian

-----Original Message-----
From: David J. Otis <dj-@dotis.com>
To: Loopfram-@topica.com <Loopfram-@topica.com>
Date: July 15, 2001 11:51 AM
Subject: RE: v-700 heads



 
they are not real plentiful, I have a set of NOS, Mark might have some
too.
 
 If you have a V700 with the smaller valves, that may be your problem.

-----Original Message-----
From: Robert Hawkes [mailto:haw-@frontiernet.net]
Sent: Sunday, July 15, 2001 9:29 AM
To: Loopfram-@topica.com
Subject: Re: v-700 heads


Dave,
I have never seen inserts that fit into the heads like that. I have only
seen the short plastic inserts that fit into the carb body. Could that
be
 
 why my bike has difficulty at times? Are these inserts easy to come by?
Bob Hawkes


============================================================
Need to s-t-r-e-t-c-h your dollars?
Get more bang for your buck with cool savings, hot deals, &
free stuff.
http://click.topica.com/caaacgFb1dfltb1FlG8f/TopOffers
============================================================

============================================================
How much can you save on your favorite stuff?
With TopOffers, the sweet deals & super savings never stop.
http://click.topica.com/caaab6jb1dfltb2DJrHf/TopOffers
============================================================

Entire thread: