Subject: Re: Hard starting Eldo after warmup
Author: andrew hill
Date: Apr 12, 2002, 9:42 PM
Post ID: 1710051890
Dave-
like someone said- check your timing, both at idle and full advance. if
o.k., your starter needs to be cleaned up. dissassemble it, hose it out with
electrical contact spray, sand off [lightly!] the brushes, and reassemble.
your rt. carb has the float level set too low, or the primary jet is
partly clogged. first off, tho, back out the idle mixture screw 1/4 turn at
a time to see if the rpm's increase. i have one of these that requires
re-adjustment pretty regularly. and like someone else said- be sure that the
needle is in the middle groove.
keep us posted........
andy
----- Original Message -----
From: "David Szenasy" <davids-@hotmail.com>
To: <Loopfram-@topica.com>
Sent: Thursday, April 11, 2002 11:01 PM
Subject: Hard starting Eldo after warmup
============================================================
Do you need a new computer but don't seem to have the money
to buy one? Check us out...With MyComputerClub.com you can
buy a new computer NOW and pay for it later. No credit
Checks - No credit turndowns! New Computers from $38/month
http://click.topica.com/caaajK7b1dfltb2Paqpa/PlayersVacationClub
============================================================
My Eldo is very difficult to start after it is warm. Also, I seem to notice
that the RH cylinder is hotter than the LH while just running in my garage.
Airflow should be the same on both, as I am using a large fan for equal air
flow. Any ideas?
David Szenasy
_________________________________________________________________
Send and receive Hotmail on your mobile device:http://mobile.msn.com
============================================================
Turn your life around in 30 days!
Success in business and financial rewards. Real happiness.
With Anthony Robbins' Personal Power®II: The Driving Force,
you can make it happen. Click Here!
http://click.topica.com/caaakj1b1dfltb2Paqpf/PersonalPower
============================================================