Topica Loopframe_Guzzi Archive


Subject: Re: oil pressure relief valve, drain plug

Author: Martin Cooke

Date: May 9, 2002, 6:29 AM

Post ID: 1710224773


i have tested suspect pressure release valves by blowing compressed air in
at varying pressures 'til they let go. a crude test definitely, but ones
i've tested all have opened within spec.

re: drain plug. it's wrong. but it does show it though, doesn't it?

cookie


----- Original Message -----
From: "Fred Sahms" <fr-@fredsgarage.net>
To: <Loopfram-@topica.com>
Sent: Thursday, May 09, 2002 1:34 PM
Subject: oil pressure relief valve, drain plug


 Hi all,

I was cleaning and reassembling the oil pressure relief valve on the
Eldo, and it has one thick steel washer and one slightly thinner copper
washer between the cap and the body. The parts book shows one, and
Guzziology says the pressure was set using thin washers. I don't think
it has been monkeyed with, but..

Also, the parts book shows the drain plug facing forward..tell me this
wrong.

73 Eldo in crates
78 T3/949

Entire thread: