Topica Loopframe_Guzzi Archive


Subject: RE: Arrgghh generator backet cracked

Author: Fred Sahms

Date: May 22, 2002, 5:22 AM

Post ID: 1710300338


Anyone have a pic of the bracket addition?

TIA
David Szenasy wrote:
 Fred...

On my SECOND bracket, to prevent the cracking I did two things. First I

really watch that my generator belt is not too tight, and secondly, I
welded
and drilled a extension piece onto my bracket, that attaches to the
distributor bolt. Gives a better mount.

David Szenasy
1972 Eldo

 From: Fred Sahms <fr-@fredsgarage.net>
Reply-To: Loopfram-@topica.com
To: Loopfram-@topica.com
Subject: Arrgghh generator backet cracked
Date: Mon, 20 May 2002 15:40:15 +0000

All this talk of loose/buzzy generator brackets prompted me to pull mine
out and examine it. It shows some evidence of running with the bolts
loose and there is a nice crack from the forward hole to the edge. When
I bolted it to the block and put in the generator, the generator doesn't
quite touch the block where the locating pin is. Is theis where guys
have been adding the rubber?

I am bidding on another bracke on Ebay (Hi Mike!)

73 Eldo in crates
78 T3/949


_________________________________________________________________
Join the world's largest e-mail service with MSN Hotmail.
http://www.hotmail.com



73 Eldo in crates
78 T3/949

Entire thread: