Subject: couple o questions
Author: John Prusnek
Date: Jun 5, 2002, 9:38 PM
Post ID: 1710383399
Date: Wed, 05 Jun 2002 12:55:45 -0400 From: "Bill Berry" <chris-@charter.net> Subject: Re: couple o questions Will try that although the leak seems to start under the carb manifold. Guess I'll hear the throwout bearing crunching? |
things up enough to slow down the engine.
| Is that a big job to replace? I've done a lot of mechanical work over the years, but never messed with a clutch. Guess while I'm in there I should replace the clutch plates and do the 2mm to 4mm thingy conversion too (can't remember what exactly it is...will read Guzziology tonight). |
it's right behind it, although it's going to be a bitch since you're
working under the bike. Otherwise you'd have to take the swingarm off.
You don't have to pull the clutch out to do the throwout bearing,
although if you're doing the clutch you'll be pulling the engine and the
throwout bearing will be a simple thing. Do the Moto Int'l. o-ring fix
while you're in there. Guzziology mentions it.
John Prusnek