Topica Loopframe_Guzzi Archive


Subject: Re: disc brake eldo /bar mounts

Author: EldoMike

Date: Jul 11, 2002, 6:23 AM

Post ID: 1710585505


Karl, you might want to do some trading with Mark as he's always needing
those for restorations...

Mike
www.classicguzzi.com

----- Original Message -----
From: "Karl Kologiski" <jane-@gte.net>
To: <Loopfram-@topica.com>
Sent: Wednesday, July 10, 2002 8:28 PM
Subject: RE: disc brake eldo /bar mounts


 yea, that is the mounts. I can not decide if I like them or not. I guess
they will not look bad after I polish them out. Look like you could mill
them out to accept 1 inch bars. My dad just picked up a new Cali special
sport with the 1 inch bars. They really make the bike.

Karl and Jane Kologiski
MGNOC Central Florida Reps
Bird at The Wheel, Motorcycle Arts
St. Petersburg Florida

Visit our Website athttp://home1.gte.net/janemac/bird.html


-----Original Message-----
From: Alan Dunphy [SMTP:adun-@midmaine.com]
Sent: Wednesday, July 10, 2002 3:33 PM
To: Loopfram-@topica.com
Subject: Re: disc brake eldo /bar mounts

Karl,
Those bar clamps are different than the ones on my LAPD with a
disc
 but that is not surprising as a lot of thing are different on the LAPD.
How
 ever I know of at least one other '74 Eldorado w/disc (not LAPD) that has
the bar mounts the same as yours. I have seen several photos of this Goose
and it appears to be original right down to the paint. See shortcuts to
photos below.

http://home.midmaine.com/~adunphy/moto5.jpg
http://home.midmaine.com/~adunphy/moto6.jpg

Alan
'74 Eldorado LAPD Wixomized
MGNOC 4352

Alan R. Dunphy
adun-@midmaine.com
Pittsfield, ME 04967-1426


----- Original Message -----
From: "E. C. Bud Durdle" <bu-@olympus.net>
To: <Loopfram-@topica.com>
Sent: Tuesday, July 09, 2002 12:01 AM
Subject: Re: disc brake eldo /bar mounts


On Monday 08 July 2002 03:52 am, you wrote:
 Date: Sun, 7 Jul 2002 12:18:13 +0000
From: Karl Kologiski <jane-@gte.net>Digest for
Loopfram-@topica.com, issue 845
 Subject: Karl Kologiski <jane-@gte.net>
Cus their beutiful. Mine had them also and loop framers always notice . B

 looking at the disc brake eldo I just picked up, I notice they have
diffrent handle bar mounts. These are big cast aluminum units that
tighten from the bottom and have smooth dome caps on top of the bars.
Does anyone know why these were used instead of the regular style ?

Karl and Jane Kologiski
Bird at The Wheel - Motorcycle Arts
Visit our Web Site At
http://home1.gte.net/janemac/bird.html

Entire thread: