Topica Loopframe_Guzzi Archive


Subject: Re: Tool

Author: Lenny Seidman

Date: Jul 30, 2002, 5:02 AM

Post ID: 1710697925



--------------6AAFBA1A6A378E9DC7BDCE65
Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854"; x-mac-creator="4D4F5353"
Content-Transfer-Encoding: 7bit

Jesse,
I'm interested in a tool as well.

lenny seidman

murp-@aol.com wrote:

 Jesse,
I am also interested in a tool when you get around to making some.
Brian

By the way, how old is the picture of the '74 Eldo with the asking
price of $3500? That can't be an up-to-date price for an unrestored bike
with 5000 original miles. Back in the seventies in Canada, I had exactly
the same model bike with 4 leading shoe brakes and Amal carbs.

Jesse Open wrote:
 I will send you an Email. Affordable is the word .
Alan Dunphy wrote:
 Jesse,
How about an estimate of price. Pretty is as pretty does, The tool
not the reunion pic, tool steel and 1018 or 1020 CRS looks just about
right
to me.

Alan
'74 Eldorado LAPD Wixomized
MGNOC 4352

Alan R. Dunphy
adun-@midmaine.com
Pittsfield, ME 04967-1426

----- Original Message -----
From: "Jesse Open" <Beaver-@comcast.net>
To: <Loopfram-@topica.com>
Sent: Saturday, July 27, 2002 6:05 PM
Subject: RE:


 Hey Bill,
Yup itsa homebrew . Ugly but effective. The "Owner " is my bride ,not
me LOL . I'm FAR too ugly for pics.
I was talking before about running off a few. I COULD make them out of
Stainless and CNC a few for those who need pretty tools. This one is
made from tool steel welded to a piece of 1018 or 1020 CRS .
If I get a chance next week I'll run off a dozen or so.
Bill Berry wrote:
 Nice pic of you at the class Reunion! ;)

That castellated whatchamadoodle wrench looks homemade.
Did you make it? I can see how it would be superior to
other types of wrenches on the exhaust nut. Mine were so
chewed up from PO's, that I just used a Channel-lock.
Worked for me, but I would like to know where to get one
of those types you have.
Chris in NC

On Sat, 27 Jul 2002 20:12:52 +0000
Jesse Open <Beaver-@comcast.net> wrote:
http://www.picturetrail.com/gallery/view?p=999&gid=1019192&uid=636945&membe
rs=1
 
 
 



I hope this works ! I may have to email direct to you.

Is that the Single malt talking or just another CHEAP
WHINE ?



Is that the Single malt talking or just another CHEAP WHINE ?



Is that the Single malt talking or just another CHEAP WHINE ?



--------------6AAFBA1A6A378E9DC7BDCE65
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Jesse,
<br>I'm interested in a tool as well.
<p>lenny seidman
<p>murp-@aol.com wrote:
<blockquote TYPE=CITE>Jesse,
<br> I am also interested in a tool when you get around to
making some.
<br>Brian
<p> By the way, how old is the picture of the '74 Eldo with
the asking
<br>price of $3500? That can't be an up-to-date price for an unrestored
bike
<br>with 5000 original miles. Back in the seventies in Canada, I had exactly
<br>the same model bike with 4 leading shoe brakes and Amal carbs.
<p>Jesse Open wrote:
<br>> I will send you an Email. Affordable is the word .
<br>> Alan Dunphy wrote:
<br>> > Jesse,
<br>> > How about an estimate
of price. Pretty is as pretty does, The tool
<br>> > not the reunion pic, tool steel and 1018 or 1020 CRS looks just
about
<br>> > right
<br>> > to me.
<br>> >
<br>> > Alan
<br>> > '74 Eldorado LAPD Wixomized
<br>> > MGNOC 4352
<br>> >
<br>> > Alan R. Dunphy
<br>> > adun-@midmaine.com
<br>> > Pittsfield, ME 04967-1426
<br>> >
<br>> > ----- Original Message -----
<br>> > From: "Jesse Open" <Beaver-@comcast.net>
<br>> > To: <Loopfram-@topica.com>
<br>> > Sent: Saturday, July 27, 2002 6:05 PM
<br>> > Subject: RE:
<br>> >
<br>> >
<br>> > > Hey Bill,
<br>> > > Yup itsa homebrew . Ugly but effective. The "Owner
" is my bride ,not
<br>> > > me LOL . I'm FAR too ugly for pics.
<br>> > > I was talking before about running off a few. I COULD
make them out of
<br>> > > Stainless and CNC a few for those who need pretty tools. This
one is
<br>> > > made from tool steel welded to a piece of 1018 or 1020 CRS .
<br>> > > If I get a chance next week I'll run off a dozen or so.
<br>> > > Bill Berry wrote:
<br>> > > > Nice pic of you at the class Reunion! ;)
<br>> > > >
<br>> > > > That castellated whatchamadoodle wrench looks homemade.
<br>> > > > Did you make it? I can see how it would be superior
to
<br>> > > > other types of wrenches on the exhaust nut. Mine were
so
<br>> > > > chewed up from PO's, that I just used a Channel-lock.
<br>> > > > Worked for me, but I would like to know where to get
one
<br>> > > > of those types you have.
<br>> > > > Chris in NC
<br>> > > >
<br>> > > > On Sat, 27 Jul 2002 20:12:52 +0000
<br>> > > > Jesse Open <Beaver-@comcast.net> wrote:
<br>> > > >
<br>> > ><a href="http://www.picturetrail.com/gallery/view?p=999&gid=1019192&uid=636945&membe">http://www.picturetrail.com/gallery/view?p=999&gid=1019192&uid=636945&membe</a>
<br>> > >
<br>> > >
<br>> > rs=1
<br>> > > > >
<br>> > > > >
<br>> > > > >
<br>> > > > >
<br>> > > > > I hope this works ! I may have to email direct to you.
<br>> > > > >
<br>> > > > >Is that the Single malt talking or just another CHEAP
<br>> > > > >WHINE ?
<br>> > > > >
<br>> > > > >
<br>> > > >
<br>> > > >
<br>> > > >
<br>> > >
<br>> > >
<br>> > >
<br>> > > Is that the Single malt talking or just another CHEAP WHINE ?
<br>> > >
<br>> > >
<br>> >
<br>> >
<br>> >
<br>> >
<br>>
<br>>
<br>>
<br>> Is that the Single malt talking or just another CHEAP WHINE ?
<br>>
<br>>
<br>>


</html>

--------------6AAFBA1A6A378E9DC7BDCE65--

Entire thread: