Subject: Re: Headlight shell grommets/wiring
Author: Greg Hopkins
Date: Aug 14, 2002, 6:29 PM
Post ID: 1710806891
--part1_18c.c72d401.2a8c5e07_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
replacement grommets are available at any hardware shop worth it's salt. The
main harness goes on the right side of the tank, through the front, where the
tank is curved out to accept the wiring , just below the mounting bolt I
believe.I put some of my harness in the square rail under the backbone of the
frame and secured it with cable ties. Just to make it neat in there. Maark at
Moto Guzzi Classics has wiring diagrams blown up and laminated for Ten
dollars, there pretty nice. Good Luck, Grreeg, '74 LAPD,(Eldo)
--part1_18c.c72d401.2a8c5e07_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
<HTML><FONT FACE=arial,helvetica><FONT SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">replacement grommets are available at any hardware shop worth it's salt. The main harness goes on the right side of the tank, through the front, where the tank is curved out to accept the wiring , just below the mounting bolt I believe.I put some of my harness in the square rail under the backbone of the frame and secured it with cable ties. Just to make it neat in there. Maark at Moto Guzzi Classics has wiring diagrams blown up and laminated for Ten dollars, there pretty nice. Good Luck, Grreeg, '74 LAPD,(Eldo)</FONT>
</HTML>
--part1_18c.c72d401.2a8c5e07_boundary--