Topica Loopframe_Guzzi Archive


Subject: Re: disc Eldo Question

Author: Alan Dunphy

Date: Aug 16, 2002, 9:43 AM

Post ID: 1710819111


According to my parts list they should be "13504541- cap, front fork- Qty 2
each " from plate 1 "front fork, fender, disc brake control". Don't know if
they are still available though.

Alan
'74 Eldorado LAPD (w/ the burnt clutch)
MGNOC 4352

Alan R. Dunphy
adun-@midmaine.com
Pittsfield, ME 04967-1426

----- Original Message -----
From: "Karl Kologiski" <jane-@gte.net>
To: <Loopfram-@topica.com>
Sent: Friday, August 16, 2002 6:55 AM
Subject: RE: disc Eldo Question


 that is the part. I bought a set of new dampers and seals, and now I can
not get the caps back on. They screw down 1/2 way and lock up. The
threads do not look to bad so I do not know that the problem is. I need
some new ones anyway. It looks like the PO used a chisel and hammer to
remove and install them. I have a 74 Eldo parts book (even has a break
down for amal carbs) it does not have a break down for a disc or 4LS
front end.



Greg Hopkins wrote:
 Do you mean the threaded plug tht screws into the top of the fork ? It
has a
big slot on top and an o-ring at the bottom. It's also threaded in the
middle
and accepts an all en screw to attach the fork cartridge? The threaded
part
in the middle accepts a large bolt? for a '74 Eldo? Greg '74 Eldo LAPD



Karl and Jane Kologiski
Bird at The Wheel - Motorcycle Arts
Visit our Web Site At
http://home1.gte.net/janemac/bird.html

Entire thread: