Topica Loopframe_Guzzi Archive


Subject: RE: Stainless fasteners for Rocker covers

Author: Jesse Open

Date: Aug 16, 2002, 1:03 PM

Post ID: 1710820328


I'm just pointing out the possible differences in the options. YOU need
a dose of your own advice.
Zerhackermann wrote:
 And I am offering other options. Try not to get your panties in a wad
old timer. You need to lighten up.


-----Original Message-----
From: Jesse Open [mailto:Beaver-@comcast.net]
Sent: Friday, August 16, 2002 12:36 PM
To: Loopfram-@topica.com
Subject: RE: Stainless fasteners for Rocker covers


Did you check the price ? Heck the Chinese is "good stuff" but not a a
buck a throw . I'm just passing these on at the same 42 cents apiece
they cost me. Trying to help folks get a better deal than they would get

at a *DECENT* hardware store. Let alone some backwoods rain forest joint

:-( .
Zerhackermann wrote:
 Any *decent* hardware store sells the good stuff.


-----Original Message-----
From: Jesse Open [mailto:Beaver-@comcast.net]
Sent: Thursday, August 15, 2002 12:32 PM
To: Loopfram-@topica.com
Subject: RE: Stainless fasteners for Rocker covers


The hardware stores around here sell Chinese made 6mm x 25mm stainless
for about $1 per screw or a bit oveer $16 a set .The sets I have are
excellent industrial quality.
Crud plated are a LOT cheaper.

The key blanks are genuine OEM NIEMAN not Neuman .

Zerhackermann wrote:
 Any decent hardware store (NOT home depot, etc) will have the same
things. Moto-I also has them. The cost was roughly the same. Just
take
 
 the nasty old bolt with you and go hit the bins.

-----Original Message-----
From: Ross [mailto:ariel-@earthlink.net]
Sent: Wednesday, August 14, 2002 11:31 PM
To: Loopfram-@topica.com
Subject: Re: Stainless fasteners for Rocker covers


Jesse,
the same for my Ambo, after the others. Also, what are you asking
for
the blanks? Please e-mail me off list. Regards, Ross on 8/14/02
18:27,
 
 Robert Hawkes at 3haw-@bluefrognet.net wrote:

 Jesse,
If you have an extra set for my Ambo, let me know. Bob
----- Original Message -----
From: Jesse Open <Beaver-@comcast.net>
To: <Loopfram-@topica.com>
Sent: Wednesday, August 14, 2002 6:16 PM
Subject: RE: Stainless fasteners for Rocker covers


 Ian,
I have them for $3.50 per side. These are QUALITY industrial
grade stainless socket head cap screws. Let me know if you want
some.

I also have a few NEW ,GENUINE Neuman key blanks for the tool
boxes and steering head. Ian Adkins wrote:
 Hey all,

I rememeber a while back there was someone selling stainless
rocker
cover fasteners.

I need two sets. Anyone have a set to sell or can put me in
touch with the right people.

Thanks...Ian



Is that the Single malt talking or just another CHEAP WHINE ?

1972 LAPD Eldo
1977 T3
1993 Cal III Fuel Injection



Is that the Single malt talking or just another CHEAP WHINE ?

1972 LAPD Eldo
1977 T3
1993 Cal III Fuel Injection



I take mine anywhere without worrying WITHOUT disc brakes ! But then
again I never worried on ANY bike ,even the BRIT bikes with LUCAS
electrics !And they NEVER let me down.At least since 1966 !

1969 V700 Euro
1972 Eldo LAPD
1993 Cal III Fuel Injection
2003 EV NEXT YEAR !!



I take mine anywhere without worrying WITHOUT disc brakes ! But then
again I never worried on ANY bike ,even the BRIT bikes with LUCAS
electrics !And they NEVER let me down.At least since 1966 !

1969 V700 Euro
1972 Eldo LAPD
1993 Cal III Fuel Injection
2003 EV NEXT YEAR !!

Entire thread: