Topica Loopframe_Guzzi Archive


Subject: Re: Carb Stix

Author: Frank Casssese

Date: Sep 11, 2002, 6:24 PM

Post ID: 1710992529


there should be a screw on each intake manifold. You may have to get 6mm
adapters . Most adapters that came with carb stix were for jap bikes.

On Thu, 12 Sep 2002 01:05:23 +0000 Keith Ruff <klru-@fcc.net> writes:
 Just yanked my carb stix out of storage, been there for many a year
and
figured I would try them out on the Guzzi. Problem is, I don't
recall
where to hook the hose to on the carb. My stix are the old
fashioned
mercury type with 4 lines. I'll have to plug up 2 of them and hook
up
one each of the other 2 lines to each carb, but I can't remember
where I
hooked them up to when I used them on the 78 BMW R100S I had. The
instructions just say to attach the lines but not where to. I do
have
some adapter tubes for the hoses, but I'm not sure where they screw
into. I tried the direct opposite side where the fuel mixture screw
is
(the screw with the spring on the carb) but it was too small and
slipped
in without tightening down. Can someone tell me where to hook up
the
carb stix hoses please? I follow the rest of the instructions.

Thanx!


Keith Ruff
71 Police Ambassador - NJ


________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.

Entire thread: