Subject: Setting Carbs
Author: Keith Ruff
Date: Sep 19, 2002, 5:19 AM
Post ID: 1711042367
Should this be done when the bike is warm or cold? As far as synching
the carbs, I do not have the screws in the manifold to tap into to do
this, should I even bother drilling the holes in them to use my carb
stix? What steps should be followed, I gather 1st turn the idle screws
all the way in (clockwise), then back them off 1 1/4 turns, then set the
mixture on each side (my right side seems to be dead on per the spark
plug condition, left side appears too rich (blackish)). After mixture
is set, go back and adjust idle speed on each side making sure to do
them evenly?
Keith Ruff
71 Police Ambassador - NJ