Topica Loopframe_Guzzi Archive


Subject: Re: Fork Dampers

Author: EldoMike

Date: Oct 2, 2002, 3:24 PM

Post ID: 1711132090


Let me look, I think I might off one of those parts T's I had....if I got
them I'll send them off....

Mike
www.classicguzzi.com

----- Original Message -----
From: "Paul Linn" <paul-@attbi.com>
To: <Loopfram-@topica.com>
Sent: Wednesday, October 02, 2002 5:20 PM
Subject: Re: Fork Dampers


 Thanks for the info David. Now the thing is, are they still available.
Does
 anyone on the list maybe have some good used ones they want to get rid of.

Paul
Richmond, Va
73 Eldo custom project "Elvira" coming together slowly
76 T3 basket
----- Original Message -----
From: "David Washburn" <guzzi-@aol.com>
To: <Loopfram-@topica.com>
Cc: <guzzi-@netscape.com>
Sent: Wednesday, October 02, 2002 5:30 PM
Subject: RE: Fork Dampers


 
Paul Linn wrote:
 What is the purpose of the locating nub piece on the spring end of the
damper that fits into the fork leg.

Ugh, that thing was a problem for me on my Eldo/SP. The ones I had did
not have the nub and that was a bad thing. The bolt that secures the
bottom of the damper must be properly torqued with a fresh crush washer
or bloooop, out comes your fork oil. The nub is on the outside of this
part, two teeth are on the inside. Together they hold the damper rod
still so you can torque it. See diagram:

http://www.dropbears.com/m/models/guzzi/v7-850/p95_98.htm

I replaced the nubless wonders with a pair from the SP donor bike and
now all ist gut.

David

Entire thread: