Topica Loopframe_Guzzi Archive


Subject: RE: DC charging system question

Author: Fred Sahms

Date: Feb 3, 2003, 12:39 PM

Post ID: 1711866253



Fred Sahms wrote:
 
Jtomel-@aol.com wrote:
With an INTERNAL ground (such as the generators used on
 Guzzis) you polarize by DISCONNECTING the FIELD lead and MOMENTARILY
touching it to the BAT terminal on the regulator. With an EXTERNAL
ground you just momentarily connect a jumper wire from the BAT to the
GEN or ARM terminals of the regulator.

So to do this I disconnect the FIELD lead *at the regulator?* and touch
it momentarily to the BAT terminal on the regulator?

Or do I disconnect the FIELD lead *at the generator?* and touch it
momentarily to the BAT terminal on the regulator?

Thanks!


And is this done when the motor is running, or just key on, or?
 


73 Eldo (T-minus)
78 T3/949



73 Eldo (T-minus)
78 T3/949

Entire thread: