Subject: clutch pushrod leak
Author: Fred Sahms
Date: Mar 12, 2003, 6:18 AM
Post ID: 1712218237
I put about 500 miles on the Eldo at Daytona, and it ran great. It did
develop a small leak at the clutch throwout bearing outer body. I will
be pulling the swingarm tonight to take a look at the o-ring and the
hole in the rear cover. I have new o-rings and a spare outer body.
I don't remember it being especially worn or pitted when I put it all
together, and clutch action has been fine. I am hoping I cut the o-ring
or something easy. Someone suggested I smooth the inside of the hole
with Scotchbright or similar.
Any other suggestions?
TIA
73 Eldo (award winner!)
78 T3/949