Subject: Re: Shift parts
Author: Greg Field
Date: May 5, 2003, 9:41 AM
Post ID: 1712871798
--Apple-Mail-2-829252968
Content-Transfer-Encoding: 8bit
Content-Type: text/plain;
charset=ISO-8859-1;
format=flowed
I don't have a spare but have some advice:
Those crossover shafts for came with at least two different diameters
on the splined portion. You need one to match the linkage you have or
need to get with the shaft the piece that attaches to the spline.
GF
On Monday, May 5, 2003, at 06:09 AM, Paul Linn wrote:
| Ok Loop fans, looking for a piece for my floorboards. I need the small shaft that goes thru the rear of the rail that the linkage attaches > to. Paul Midlothian, Va 73 Eldo "Elvira" at a halt in favor of "Daisy" 74 Eldo "Daisy" new project |
--Apple-Mail-2-829252968
Content-Transfer-Encoding: quoted-printable
Content-Type: text/enriched;
charset=ISO-8859-1
I don't have a spare but have some advice:
Those crossover shafts for came with at least two different diameters
on the splined portion. You need one to match the linkage you have or
need to get with the shaft the piece that attaches to the spline.
GF
On Monday, May 5, 2003, at 06:09 AM, Paul Linn wrote:
<excerpt><fontfamily><param>Arial</param><smaller>Ok Loop fans,
looking for a piece for my floorboards. I need the small shaft that
goes thru the rear of the rail that the linkage attaches to.
=A0
Paul
Midlothian, Va
73 Eldo=A0 "Elvira" at a halt in favor of "Daisy"
74 Eldo "Daisy" new project
</smaller></fontfamily>=A0
=
</excerpt>=
--Apple-Mail-2-829252968--