Subject: Re: electronic ignition kit
Author: Ron Komoroski
Date: May 28, 2003, 8:54 AM
Post ID: 1713167179
Greg,
Yes, contained in the ignitor box is a plastic ring containing a magnet that
fits down over the points cam. In fact, it is identified w/ the "MR121" that
is the part # on the box. The pick up is identified "51W-V4" on one side,
and "IGNITOR by Pertronix, carb e.o. D-57 2" on the other.
At first look, I thought the ignitor plate replaced the points plate in the
distributor, but on closer examination, it fits on top, w/a hole for the old
points pivot post, and being held in place by the screw that was for the
points.
Question, is there a simple check for the condition of the advance springs?
This fancy electronic gadgetry relies on the old bob-weight-and-springs
advance mechanism.
Thanks,
Ron
----- Original Message -----
From: "Greg Field" <gre-@cwizard.com>
To: <Loopfram-@topica.com>
Sent: Tuesday, May 27, 2003 3:20 PM
Subject: Re: electronic ignition kit
| Ron: Is there a magnet or something on the rotor to trigger the ignition? Thanks! GF On Tuesday, May 27, 2003, at 09:45 AM, Ron Komoroski wrote:
|