Subject: Re: RE: Intake manifolds
Author: paul linn
Date: Jun 14, 2003, 7:07 PM
Post ID: 1713391845
Matt,
I will trade you a set with the screws for the custom ones you have.
Might as well seeing as I am using the frame from you. Just don't do
anything else to them till then.
Paul
----- Original Message -----
From: Matt Moore <moor-@hotmail.com>
Date: Saturday, June 14, 2003 7:54 am
Subject: RE: Intake manifolds
| The ones that I have are custom made short and straight, and are constructed of stainless steel. (I'll take a picture and email to those who might want to see.) They were made this way because the stock ones curved in and I think the carbs or filter pods interfered with the frame or the battery. (Ask Paul Linn about how the frame is chopped) Now that I am using a stock frame, I will no longer have a clearance problem. I've tried to knock the tap out using a punch and tapping it back out, but it broke off with a piece sticking up on one side and I can't get a good spot to hit. I've just finished setting up my big vise, so i'll give it another try to punch it through. Matt |