Topica Loopframe_Guzzi Archive


Subject: Re: foot peg & shifter parts needed

Author: Giller,Bruce C.

Date: Aug 18, 2003, 7:43 AM

Post ID: 1714189281



My Eldo came with Triple A floorboards which I have converted over to
stock pegs. I did notice that that floorboards did not have any support
for the shifter mechanism as does the stock peg setup (the bushing). Is
it normal not to have such a support for these floorboards (or any
aftermarket floorboards, for that matter) or should one be fitted like
Ken is doing for his bike by modifying a stock peg?

Bruce

'72 Eldo

Ken Pitts wrote:

 1- Left foot peg, the condition of the peg itself is not important as I will
be cutting off the peg above the mounting bolt & only using the mounting point
that holds the bushing for the shifter shaft.

Entire thread: