Topica Loopframe_Guzzi Archive


Subject: Re: Buffing Aluminum - Part 2

Author: 3haw-@bluefrog.biz

Date: Nov 7, 2003, 3:06 PM

Post ID: 1715142829



Scotty I want to know about that stuff also, Bob
----- Original Message -----
From: Scott J. Grupe <sjgr-@direcway.com>
To: <Loopfram-@topica.com>
Sent: Thursday, November 06, 2003 9:38 PM
Subject: Re: Buffing Aluminum - Part 2


 I use a 00 micro balloon polish cream for aircraft. What it does is
smoothes
 out the micro scratches any or your abrasive polishes leave for a mirror
finish.

email me later for the brand and web address as I just got in from 4 days
on
 the trail.

you will love the stuff and wont believe the results. Forget your cycle
stuff and buffing wheels.

scotty
----- Original Message -----
From: "Jeffrey Buick" <rusty-@comcast.net>
To: <Loopfram-@topica.com>
Sent: Thursday, November 06, 2003 7:53 PM
Subject: RE: Buffing Aluminum - Part 2


 Hey John,
Thanks for the relies. Once you get your parts buffed do you coat them
with anything or just let them ride?
Thanks again.
-Jeff


John Ulrich wrote:
 

Jeffrey Buick wrote:
 Any helpful hints for buffing

Part 2

Forgot to mention, Do not mix polishing compounds on the same buffs.
Mark each buff with the compound you're using on it. Wash the old
caked
 
 
 
on polish off frequently and of course when switching compounds. Have
a
 
 
 
soft cloth to wipe the white rouge/dust off with frequently when in
the
 
 
 final step.

The results get better as you work more on it. I ended up redoing
parts
 
 
 
2-3 times as I caught on and the results got better.

Later,
JU



Jeff Buick
Detroit, MI

1972 Eldo LAPD
1974 Eldo LAPD
1974 Eldo Civilian
1972 V7-Sport

Entire thread: