Topica Loopframe_Guzzi Archive


Subject: RE: Converting to 5 Speed

Author: Custom Guzzi

Date: Dec 5, 2003, 9:15 PM

Post ID: 1715422420



You can change the rear cover with a Eldo one and then your speedo drive
is inn the right location. Otherwise you have to cut a notch in your
battery tray for the speedo cable. If you look at the rear cover on an
Eldo, you will see where the drive is located and the blank right next
to it for the other.

Paul
Midlothian, Va
73 Eldo "Elvira" at a halt in favor of "Daisy"
74 Eldo "Daisy" new project

Donny wrote:
 
Is the speedo drive angle a show stopper, or is there a relatively
simple work around?

GUZZI-@aol.com wrote:
 
Speedo drive angle is not right,also shift pattern different,all else
the
same.Mark

Entire thread: