Topica Loopframe_Guzzi Archive


Subject: RE: Shocks

Author: Gary Schroeder

Date: Jan 10, 2004, 10:17 PM

Post ID: 1715713404



Yup, I have a Lemans 1000 with the Konis. I weigh 230#, setting 2 is
perfect.......


GaryS

-----Original Message-----
From: Greg Field [mailto:gre-@gregfield.com]
Sent: Saturday, January 10, 2004 9:15 AM
To: Loopfram-@topica.com
Subject: Re: Shocks


I use a set of Konis from a LeMans 1000. They are longer than Ambo
length and give a bit more ground clearance. Work perfectly with
damping on 2, and I weigh 240. The Ikons should be identical to the
Konis.

GF

On Friday, January 9, 2004, at 12:24 PM, John Ulrich wrote:

 
Gary Cheek wrote:
 I think Tom Bowes is running that combo on his Ambassador . Along >
with
it he is using HD Progressive front springs.

Gee wiz..Tom didn't set up the Ambo I purchased from him that nicely!

Anyway I went with the Ikon's MG Cycle stocks. What swayed my
purchase,
is the ability to adjust the rebound on the shock. I have a set of
Works Shocks on a Bassa and adjusting compression is a $100 bill for
new
valves and rebuilding.

http://www.mgcycle.com/shock.html

I like it at the lowest setting (#1 of 4) so it soaks up the rutty city
roads without jolting the back of this 220lb rider. I'll kick up the
preload with a passenger. Ask any northern snowmobiler about the need
to adjust your shock valving.

Later,
JU

Entire thread: