Topica Loopframe_Guzzi Archive


Subject: rear end gearset

Author: Prusnek

Date: Feb 19, 2004, 8:36 PM

Post ID: 1716094810



John:
I'm confused; we're not looking for quick, we're looking to lower the
final engine rpms, since we've got plenty of low end grunt with the V8
engine pushing it.
Are the Eldo ratios below available as different sets?
John Prusnek

 I've put a 7/33 in an Ambo housing. Until you snug up the bolts you
swear it will rub on the sides because it is a larger diameter then the
older 8/35.

Ambo 8/35 = 4.375 ratio
Eldo 8/37 = 4.625
7/33 = 4.714
8/33 = 4.125

The 7/33 "should" feel quicker.

Later,
JU

Entire thread: