Subject: Re: Left side cylinder is not firing
Author: Mike
Date: Feb 21, 2004, 12:41 PM
Post ID: 1716108968
Pull the valve cover and make sure the valves arn't adjusted too tight...
Eldomike
----- Original Message -----
From: "Jason Stallings" <stalli-@sbcglobal.net>
To: <Loopfram-@topica.com>
Sent: Saturday, February 21, 2004 12:54 PM
Subject: Left side cylinder is not firing
I have a problem. My bike will start on the first hit of the starter |
| time, however only ther right side cylinder is running. I have no idea |
| this is happening. Here is what I have done so far: 1. Changed spark plug 2. Tested spark plug by pulling it out and starting the bike and holding |
| close to the motor to see it spark 3. Drained the Carb bowl and let some gas run through just to make sure it was getting gas. 4. Pulled the carb off and examined it floats and needle look fine every thing on it is adjusted the same as the other side. 5. Writting this e-mail to see if someone might have an idea of what is going on. Thanks, 70 Ambo with Dell'Orto Carbs |