Topica Loopframe_Guzzi Archive


Subject: Re: adjusting carbs

Author: Grvd-@aol.com

Date: Mar 2, 2004, 4:09 PM

Post ID: 1716195989




--part1_1e9.1a54ed7f.2d767c13_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

The manual also says to idle the bike to 1000-1200 RPM while you
adjust this setting. My throttle has the thumbscrew to hold it in this position.
The start position for the right carb is 1 12 turns, but the left is 1 34 to
2 turns. Also check synchronazation of the slides before you start on the carb
adjustment. Greg '74 LAPD

--part1_1e9.1a54ed7f.2d767c13_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 8bit

<HTML><FONT FACE=arial,helvetica><HTML><FONT SIZE=2 PTSIZE=10 FAMILY="SANSSERIF" FACE="Arial" LANG="0"> The manual also says to idle the bike to 1000-1200 RPM while you adjust this setting. My throttle has the thumbscrew to hold it in this position. The start position for the right carb is 1 12 turns, but the left is 1 34 to 2 turns. Also check synchronazation of the slides before you start on the carb adjustment. Greg '74 LAPD</FONT></HTML>

--part1_1e9.1a54ed7f.2d767c13_boundary--

Entire thread: