Topica Loopframe_Guzzi Archive


Subject: Re: gas tank neck leak?

Author: GUZZI-@aol.com

Date: Jul 9, 2004, 8:34 PM

Post ID: 1717130257




--part1_a3.5db87db5.2e20bd9a_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

If the painter WAS really good,he would have left the last 1/4 inch under the
cap bare metal so gas fumes wouldnt get under paint,if he did do that,and
there is a problem then it could be like you said,never seen it though.You need
BARE metal, to seal or your asking for trouble,Mark

--part1_a3.5db87db5.2e20bd9a_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 8bit

<HTML><FONT FACE=arial,helvetica><HTML><FONT SIZE=2 PTSIZE=10>If the painter WAS really good,he would have left the last 1/4 inch under the cap bare metal so gas fumes wouldnt get under paint,if he did do that,and there is a problem then it could be like you said,never seen it though.You need BARE metal, to seal or your asking for trouble,Mark</FONT></HTML>

--part1_a3.5db87db5.2e20bd9a_boundary--

Entire thread: