I have on off my Ambo that I need a replacement damper for. Any suggestions on where to get one?
If Charlie doesn't have the complete set-up I'll dig mine out (bike is totally disassembled at the present) and take some photos.
On 8/20/04 7:49 AM, "Ray Hale" <ray.-@sfcc.edu> wrote:
Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a FREE Cutlery Set + Cutting Board! http://click.topica.com/caacvgpb1dfltb2TIW8a/OmahaSteaks -------------------------------------------------------------------
Charlie and Lannis, Any chance either of you could get a photo of this, installed or otherwise before it's over? Both would be great. That would help my efforts in finding one or making something else work. Thanks Ray
Lannis wrote:
Charlie Mullendore wrote:
Hi Lannis, From what I remember the stock Guzzi damper attaches with a bracket that
clamps around the right frame downtube and on the other end bolts to the
bottom of the lower fork yoke. There's a little curved piece that fits into the underside of the yoke and is held in place with a bolt from above. The damper then bolts onto this piece from underneath.
I think there's a n.o.s. damper and little curved piece in all of my stuff, but don't think I have the clamp part. I'll check and see, if you're interested. Cheers,
Charlie -
I am interested; if you can check and see how close you can come to selling me a "kit", I'll take what you've got and make or source the rest.
I'm about convinced that a damper will fix me right up....
Thanks!
Lannis
Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Amazing Diet Patch The fastest - Easiest way to lose weight! Try it now FREE! http://click.topica.com/caacvgtb1dfltb2TIW8f/MyDietPatches -------------------------------------------------------------------