Topica Loopframe_Guzzi Archive


Subject: Re: Fork lock cover rivet

Author: Paul P. Linn

Date: Sep 16, 2004, 4:16 PM

Post ID: 1717543689



Charlie,

I have successfully removed them by sliding a small flat blade
screwdriver underneath it and prying it up in small increments. Be sure
to get as close to the rivet as possible. Some spray lube also helps.

Paul
Midlothian, Va
MGNOC # 19926
73 Eldo "Elvira" ongoing project
74 Eldo "Daisy"



Charlie Mullendore wrote:

 Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is Gay Marriage a Civil Rights Issue? Click here and win.
http://click.topica.com/caacDvRb1dfltb6GIoLa/PermissionData
-------------------------------------------------------------------

I need to remove the rivet holding the fork lock cover to the frame in
preparation for paint (or powder) and would like to accomplish this
without damaging the chrome cover. Pretty much boogered up the last one
I removed - any tips that might help? I have a new rivet, so that's
disposable. Thanks!

Charlie
http://members.tripod.com/charlesmullendore/index.htm

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Are Americans getting fat? Give us your opinion and win.
http://click.topica.com/caacDvYb1dfltb6GIoLf/PermissionData
-------------------------------------------------------------------

--

Entire thread: