Subject: Re: ID plate rivet removal tool?
Author: IndyDi-@aol.com
Date: Sep 17, 2004, 5:13 PM
Post ID: 1717550214
--part1_7d.58a5d39a.2e7cd7a6_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
I just ground off the heads of the rivets and pushed them through to inside
of stem. OK if you have the front end off...maybe not if you don't. New rivets
from Moe at Cycle Garden fit just fine with new plate. Brett in Indy
--part1_7d.58a5d39a.2e7cd7a6_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 8bit
<HTML><FONT FACE=arial,helvetica><HTML><FONT SIZE=2 PTSIZE=10 FAMILY="SANSSERIF" FACE="Arial" LANG="0">I just ground off the heads of the rivets and pushed them through to inside of stem. OK if you have the front end off...maybe not if you don't. New rivets from Moe at Cycle Garden fit just fine with new plate. Brett in Indy</FONT></HTML>
--part1_7d.58a5d39a.2e7cd7a6_boundary--