Topica Loopframe_Guzzi Archive


Subject: Re: Carb Sticks/synchronizers?

Author: Skip & Jane

Date: Oct 6, 2004, 6:05 PM

Post ID: 1717656681



I have one and it works great. It is similar a monometer which is used to
measure differential pressure. it has a scale like a number line with 0 in
the middle. You hook a hose to each manifold and zero the meter, crank the
bike and adjust the sensitivity of the meter till the needle moves off 0,
and adjust the air screws to bring the needle back to zero. After that you
crack the throttle and then adjust your carb cables. I think they are well
worth the money



----- Original Message -----
From: "TFR" <tf-@verizon.net>
To: <Loopfram-@topica.com>
Sent: Wednesday, October 06, 2004 8:47 PM
Subject: Carb Sticks/synchronizers?


Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is America Safe? Give your opinion on Homeland Security and enter
to win!
http://click.topica.com/caacHM9b1dfltb7mpEHa/PermissionData
-------------------------------------------------------------------

Anyone have opinions as to a good set of Mercury sticks, or synch gauges to
purchase?

I have looked on the internet, and see a tremendous difference in pricing.
Also, what if anything about the TWINMAX electronic system?

Thanks,
Tim

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is Unemployment on the rise? Answer and Win!
http://click.topica.com/caacHNhb1dfltb7mpEHf/PermissionData
-------------------------------------------------------------------

Entire thread: