Topica Loopframe_Guzzi Archive
 

Subject: Re: Questions on tranny

Author: Greg Field

Date: Oct 15, 2004, 8:32 AM

Post ID: 1717705329


I put the tab up. Then adjust it for continuity (using a DVM) only on
actual neutral, and the light will never lie to you again.

While you're in there, shim the shift drum. Makes a huge difference in
shifting.

GF
On Friday, October 15, 2004, at 06:50 AM, Greg Bender wrote:

 Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Want to go on a Cruise for Free?
http://click.topica.com/caacIqOb1dfltb6KFeCa/PermissionData
-------------------------------------------------------------------

Hi Ian,

The tab on the neutral indicator should point down. I can't remember if
you are working on a 4 or 5 speed transmission, but you may want to
check out my site or the guzzi tech site...both have some helpful info.
If you are working on a 4 speed, I even have a diagram for how the
shift
return spring is to be installed. hope this helps...

http://www.thisoldtractor.com/gtbender/
loopframe.htm#Neutral_indicator_switch


http://www.thisoldtractor.com/gtbender/mg_images/
shift_return_spring.gif

http://www.thisoldtractor.com/gtbender/
loopframe.htm#Transmission_bearing_sizes


http://www.guzzitech.com/

Ian Adkins wrote:
 
Hey All,

I will be putting the tranny back together this weekend and I had a
couple
of questions and observations.

The neutral indicator tab. Does it need to have the curve at the end
go
up
or down? I am thinking that it needs to be up so that the outside part
of
the curve sits against the nub on the drum.

I noticed that one of the bearing races was easily removed from its
housing.
Lock tited it in place. I read in the manual that those need to be
secured
before putting the shafts in. I didn't know that before...know that
now
:-)

Has anyone ever had trouble installing the shift return spring? Not
the
actual installation but having the ends not want to stay on the pin?

I am looking forward to getting the tranny back together. I hate the
thought
of having that thing apart any longer that neccessary. I am also
planning a
weekend of work on getting the frame painted and preped for
reassembly.
Will
be a touch of winter here in the south so riding will be placed on the
back
burner.

By the way....we are still planning to head out to Barbers next Sat
(Oct
23). Plan is forming that we will meet at I20 and Highway 61 on Sat
morn
at
the Waffle House. Provided that the expected rains hold off we will be
there. I'll update you all through the week.

Ciao...Ian



Regards,

Greg Bender
1971 Ambassador
2000 Quota
http://www.thisoldtractor.com/gtbender

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Claim your tickets to Universal Orlando now
http://click.topica.com/caacJzlb1dfltb6KFeCf/PermissionData
-------------------------------------------------------------------

Entire thread: