Topica Loopframe_Guzzi Archive


Subject: Re: Failure for the shift lever to return...

Author: Patrick Hayes

Date: Nov 3, 2004, 10:12 PM

Post ID: 1717819714





Greg Bender wrote:
 Other than the obvious - shift return spring (which was replaced last
winter while John Ulrich and I shimmed the 4 speed transmission) - what
else should I be looking into?

The shift return spring is either intact or broken. No in between. If
the spring is working, then the hangups must be due to linkages or
pivots. Disassemble, clean, lubricate everything between your foot and
the transmission.

Patrick

Entire thread: