Topica Loopframe_Guzzi Archive


Subject: Re: trans breather plug

Author: Paul P. Linn

Date: Nov 14, 2004, 1:51 PM

Post ID: 1717883271



I have that nipple on my Eldo. Attach a hose and run it up under the
tank and not downwards. Makes a nasty mess if you run it downwards.

Paul

Ray Hale wrote:

 Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Claim your fully stuffed Christmas Stocking now
http://click.topica.com/caacQ4Sb1dfltb6GIoLa/PermissionData
-------------------------------------------------------------------

Hi,
Helped a friend pull apart the trans on his T-3 last night. Noticed the
breather plug was very different from the Eldo. I'm referring to the
plug on the left side of the tranny, most forward. The Eldo has a small
hole in the center of the plug, where the T-3 has a large nipple to
accept a hose.

Is there any reason not to use this nipple plug on the Eldo?

Also picked up a nice set of rear floorboards off of his Eldo project.
His bike came with AAA surfboards and the rear set appears to be same
manufacturer. Anyone know about these?
Ray

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
4 Free Low-Fat recipes
http://click.topica.com/caacQ4Nb1dfltb6GIoLf/PermissionData
-------------------------------------------------------------------

Entire thread: